Hydraulic unit range is composed of:
C micro range - from 6 to 24 m3/h
C compact range - from 6 to 24 m3/h
Hydraulics units are hydraulics interfaces sub compact allowing to link a mold with a loop of cooling and to drain away it by compressed air during the phases of heating.
C6 hydraulic unit allows getting back and transfer under pressure the water in loop of cooling, what allows to fill the mold at the end with the phase of heating, without water consumption.
C2 compact requires a customer industrial water with differential pressure allowing the phase of filling.
The C range requires a loop of industrial water which is able to receive and restore the water of the mold.
C MICRO
C COMPACT
HYDRAULIC UNIT C MICRO
C Range
Flow rate
Pressure*
C6
6.0 m3/h
4.4 Bar
C12
12.0 m3/h
4.0 Bar
C24
24.0 m3/h
4.0 Bar
* Add customer loop
HYDRAULIC UNIT C COMPACT
C Range
Flow rate**
Pressure***
C2V
6.0 m3/h
2.0 Bar
C2S
6.0 m3/h
2.0 Bar
C4V
12.0 m3/h
2.0 Bar
C4S
12.0 m3/h
2.0 Bar
C8V
24.0 m3/h
2.0 Bar
C8S
24.0 m3/h
2.0 Bar
** Maximum flow according to customer loop
*** Differential pressure minimum
Others products available
R RANGE
T RANGE
W RANGE
G RANGE
